Pre-curved sweep seal with a hollow chamber

This pre-curved hollow chamber seal is exclusively suitable for round or quadrant showers.

The flexible hollow chamber located below the glass insertion has a total height of approx. 8 mm and is therefore particularly well suited for sealing even smaller gap widths under the curved glass door. With a 6 mm glass thickness, a gap width of up to 8 mm can be sealed here, and with an 8 mm glass thickness, a gap of 10 mm.

These extremely durable profiles are manufactured from two different PVC thicknesses – a rigid and a soft component – in a transparent-clear finish. Each profile ensures a reliable and tight seal and visually blends perfectly into your bathroom.

This sealing profile has a total length (measured with curvature) of 100 cm. The seal begins at both ends with a straight section of 9 cm. You can easily and precisely cut this shower seal to your required length and install it without special tools, for example with standard anvil shears, a PUK saw, or mitre shears.

For further support, we are available by telephone or via our contact form.

Care tip: The shower seal should only be cleaned with chlorine-free, non-alkaline cleaning agents. Avoid using abrasive cleaners and solvents to maintain the longevity of the material and to preserve the transparent design and water repellency in the long term. Lukewarm water combined with soft microfibre cloths is ideal for this.