Sweep seal with hollow chamber for small gap widths

This hollow chamber seal is excellently suited as a sealing strip for the lower edge of the glass door, especially if the gap width below the door is very small (under 8 mm), for example with a folding shower door. The seal was designed for glass walls with a thickness of 4-5 mm.

The profile consists of rigid PVC in the area of the glass casing and soft PVC in the area of the sealing lip. Our shower seals impress with high quality and a subtle, transparent design. They reliably repel water and blend inconspicuously into the appearance of your tasteful all-glass shower.

These extremely durable profiles are manufactured from two different PVC thicknesses – a rigid and a soft component – in a transparent-clear finish. Each profile ensures a reliable and tight seal and visually blends perfectly into your bathroom.

This profile has a total length of 100 cm. You can easily and precisely cut this shower seal to your required length and install it without special tools, for example with standard anvil shears, a PUK saw, or mitre shears.

An installation video is available to simplify the installation. For further support, we are available by telephone or via our contact form.

Care tip: The shower seal should only be cleaned with chlorine-free, non-alkaline cleaning agents. Avoid using abrasive cleaners and solvents to maintain the longevity of the material and to preserve the transparent design and water repellency in the long term. Lukewarm water combined with soft microfibre cloths is ideal for this.