Sweep seal with long sealing lip

This lip seal was designed as a horizontal shower seal for shower doors with a glass thickness of 6-8 mm. The profile consists of rigid PVC in the area of the glass casing and soft PVC in the area of the sealing lip.

The vertical sweep seal has a dimension of 18 mm. As a result, a gap width of 19 mm can be sealed with a 6 mm glass thickness, and a gap of 21 mm can be sealed with an 8 mm glass thickness. Our shower seals impress with maximum quality and a subtle, transparent design. They reliably repel water and blend inconspicuously into the appearance of your tasteful all-glass shower.

These extremely durable profiles are manufactured from two different PVC thicknesses – a rigid and a soft component – in a transparent-clear finish. Each profile ensures a reliable and tight seal and visually blends perfectly into your bathroom.

This profile has a length of 200 cm. You can easily and precisely cut this shower seal to your required length and install it without special tools, for example with standard anvil shears, a PUK saw, or mitre shears.

Important note: These shower seals are NOT suitable for quadrant and curved showers. If you are looking for splash guard profiles for these shower shapes, we recommend our pre-curved sealing profiles.

For further support, we are available by telephone or via our contact form.

Care tip: The sealing lip should only be cleaned with chlorine-free, non-alkaline cleaning agents. Avoid using abrasive cleaners and solvents to maintain the longevity of the material and to preserve the transparent design and water repellency in the long term. Lukewarm water combined with soft microfibre cloths is ideal for this.