Sweep seal with short glass insert

This sweep seal serves as a sealing strip and splash guard for the shower doors of your all-glass shower. The sealing lip has been specially developed for glass walls with a thickness of exactly 6 mm and reliably seals the gap between the glass door and the shower tray or floor.

The glass insertion for this shower profile is 5 mm, which is significantly shorter than for our sealing profiles for glass thicknesses of 6-8 mm or 4-5 mm, allowing for a more precise fit.

These extremely durable profiles are manufactured from two different PVC thicknesses – a rigid and a soft component – in a transparent-clear finish. Each profile ensures a reliable and tight seal and visually blends perfectly into your bathroom.

This profile has a length of 100 cm. You can easily and precisely cut this shower seal to your required length and install it without special tools, for example with standard anvil shears, a PUK saw, or mitre shears.

Important note: These shower seals are NOT suitable for quadrant and curved showers.

For further support, we are available by telephone or via our contact form.

Care tip: The sealing lip should only be cleaned with chlorine-free, non-alkaline cleaning agents. Avoid using abrasive cleaners and solvents to maintain the longevity of the material and to preserve the transparent design and water repellency in the long term. Lukewarm water combined with soft microfibre cloths is ideal for this.