Wall & centre shower sealing profile

This vertical centre seal effectively prevents splashing water between a fixed glass panel and the door of your frameless shower enclosure for gap widths of up to 12 mm. Thanks to its transparency, it blends harmoniously into your individually designed bathroom. The seal is available for glass thicknesses of 4–5 mm or 6–8 mm.

The carrier material (U-shaped profile that is clipped onto the glass) is made of transparent-satin hard PVC and has a height of 12 mm. The sealing lip, also referred to as the flexible fin, is made of transparent-textured soft PVC. Thanks to the soft PVC component, the seal adapts closely to the glass surface, providing flexibility and elasticity.

These extremely durable profiles are made from two different PVC grades – a rigid and a flexible component – in a transparent-clear finish. Each profile ensures a reliable and tight seal and integrates discreetly into your bathroom design.

This sealing profile is available in lengths of 200 cm and 250 cm (only for 6–8 mm). A technical drawing with the corresponding dimensions is available for each product in our shop. Installation is very simple: remove the old seal, clean the glass, and clip on the new gap seal. No professional installer is required. For cutting, use a PUK saw or mitre shears.

If you have any questions or need assistance, please feel free to contact us by phone or via our contact form.

Care instructions: The seal should only be cleaned with chlorine-free, non-alkaline cleaning agents. Avoid aggressive cleaners containing chlorine as well as abrasive or solvent-based products, as these may damage the plastic. Lukewarm water combined with a soft microfiber cloth is sufficient to maintain the transparent appearance and water-repellent properties over time.